Round-the-Clock Emergency Fire Damage Cleanup in Connecticut, CT
The flames are out and the engines are gone, and you are left in the yard trying to work out the next move. One free call to Unify Fire Solutions connects you with a licensed and insured independent restoration contractor who works in your part of Connecticut, CT. We answer around the clock, and dispatch starts while you are still on the phone.
- Free referral line answered 24/7, every day of the year
- Independent local crews serving every corner of Connecticut, CT
- Written, line-item estimates before any work begins
- Help lining up paperwork your insurance adjuster will ask for
One phone number for fire calls across Connecticut, CT
Unify Fire Solutions does not do restoration work. We run the dispatch desk that gets a qualified independent contractor headed your way.
Almost nobody has been through a house fire before, so the sequence of decisions is a mystery. Who do you call first, the insurance company or a contractor? Can you go back inside? Who turns the power back on? Our dispatchers field these questions every day, from every part of Connecticut, CT, and we can usually point you in the right direction in a few minutes.
When you call +1-833-336-1630, a live dispatcher asks a short set of questions: the property type, whether the fire department has released the scene, whether there is standing water from the hoses, and whether the roof or windows are open to the weather. Those answers decide which independent crew in our network is the best match and how urgent the first visit is.
The contractors we connect you with are licensed and insured independent businesses based in or near your community. They own their equipment, employ their own crews, write their own estimates and answer for their own work. Our job is the connection: getting a qualified local pro on the phone with you at 2 a.m. instead of leaving you to scroll through search results on a cracked phone screen.
Calling costs nothing, and the line is staffed 24/7, including weekends and holidays. Whether the property is a single-family home, a rented duplex, a condo unit or a storefront, the routing process is the same anywhere in Connecticut, CT.
Have a few things handy when you call, if you can: the property address, the name of your insurance company, your claim number if you already have one, and the incident number from the fire department. If you don't have any of that yet, that's fine. Plenty of people call from a neighbor's porch with nothing but a phone, and the dispatcher will help you figure out what to gather next.
Fire Damage Cleanup services available across Connecticut, CT
A fire leaves three separate problems behind: charred materials, smoke residue that spreads through the whole building, and the water used to knock the fire down. Here is how the independent contractors in our network approach each one.
Emergency mitigation and stabilization
Mitigation is the work of keeping the damage from spreading, and with fire it is a race against time. Soot is acidic. In a matter of hours it yellows plastics and vinyl, and after a day or two it can etch glass, pit chrome and permanently stain grout. Wet drywall and insulation from the hose lines can begin growing mold in 24 to 48 hours.
The contractor who arrives typically begins with a safety walk and then secures the structure. That often means boarding broken windows and doors with plywood, tarping holes in the roof, and setting temporary fencing if the property sits close to a sidewalk. Then the water: extraction units pull standing water from carpet and subfloor, and soaked carpet pad is generally cut out and bagged.
With the building stable, crews run HEPA air scrubbers to pull fine soot out of the air, sometimes under negative pressure so particles stay out of unaffected rooms. Dehumidifiers and air movers go in where moisture meters show wet framing or drywall.
- Board-up of windows, doors and wall openings
- Tarps on the roof to keep weather off open framing
- Extraction of firefighting water and removal of wet materials
- HEPA air scrubbing plus moisture readings
Homes, condos and townhouses
Even when the flames stayed in one room, the damage almost never does. Smoke follows air pressure and temperature, which is why you find black rings around outlets in a bedroom at the far end of the hall, or soot lines on the carpet along the baseboards. A residential crew first maps how far the residue spread, room by room, before anyone touches a surface.
Dry soot from a fast, hot fire is powdery, so crews lift it with dry chemical sponges and HEPA vacuums. Wet, smeary smoke from a slow, smoldering fire is oily and needs alkaline cleaners and a lot more labor. Kitchen fires leave protein residue, a nearly invisible film that smells terrible and turns surfaces sticky. Every residue needs its own chemistry, and the wrong product can push the stain further into paint and wood.
Burned materials come out until the crew reaches sound framing. Framing that is only blackened, not structurally weakened, is often cleaned with soda or dry ice blasting and then sealed with a shellac-based or pigmented sealing primer to lock in odor before new drywall goes up. Ask the contractor to show you which studs they plan to keep and which they plan to replace, and to note it on the estimate.
- Residue mapping and spot tests before any cleaning
- Targeted tear-out of burned drywall, insulation and trim
- Blasting and sealing of smoke-stained framing
Commercial property, rentals and apartment buildings
With a business or a rental unit, the list of questions gets longer fast. A restaurant owner needs to know when the hood system can be inspected and the health inspector called back. A landlord needs to know which units are habitable and which tenants need temporary housing. A property manager with a fire in one unit of a fourplex has to stop smoke from moving through the shared attic and ducts.
Contractors who handle commercial work often phase the job so part of the space can keep operating. They build temporary poly containment walls with zip-door access, run negative air machines, and schedule the loudest demolition for nights or weekends. In a retail shop, the sales floor might reopen while the back room is still sealed off.
Stock and inventory are a separate issue. Smoke-exposed food, medication, cosmetics and anything in permeable packaging usually has to be discarded and documented for the claim. Ask the crew to photograph and list disposed inventory with quantities so your business interruption and property claims line up.
- Phased schedules so a portion of the business can reopen
- Containment between occupied and damaged units
- Inventory disposal lists for the claim file
Multi-unit buildings add a building code question. Fire-rated assemblies, such as the drywall between units or around a stairwell, have to be rebuilt to the same rating, and damaged fire alarm or sprinkler components need a licensed trade to restore them. Ask the crew if those items are part of their estimate or will go to a separate trade.
Landlords and property managers: ask the contractor for a short written status note on each unit, habitable or not, so you can send it to tenants and your insurer the same day.
Contents, odor, HVAC and firefighting water
Ask any fire survivor and they mention the smell. It gets into clothes, mattresses, the couch, the kids' stuffed animals, and the inside of every closed drawer. Contents specialists pack out salvageable belongings, inventory them box by box, and clean them off site using ultrasonic tanks for hard goods and specialty laundering or dry cleaning for textiles. Electronics often go to a separate vendor who can clean the circuit boards before soot corrodes them.
Odor control happens after cleaning, never instead of it. Crews may use thermal fogging, which mimics the heat of the fire to carry deodorizer into the same pores the smoke reached, or hydroxyl generators that can run while people are present. Ozone works well but the building has to be empty of people, pets and plants, so ask about it first.
If the HVAC system was running during the fire, the ductwork pulled smoke through every room it serves. A duct cleaning crew will inspect the air handler, coil and duct runs, clean or replace flex duct, and swap filters. Ask whether the contractor follows IICRC guidance, such as the S700 standard for fire and smoke and the S500 standard for the water side of the job.
- Pack-out, inventory and off-site contents cleaning
- Thermal fogging, hydroxyl or ozone deodorization
- Inspection and cleaning of ducts, coil and air handler
The water from the hoses is what most people underestimate. An engine can put hundreds of gallons into a building in a few minutes, and it runs down into wall cavities, under cabinets and through ceilings to the floor below. Because it carries soot and ash, it is contaminated, which is why soaked carpet, pad and insulation usually come out instead of being dried in place. Crews remove baseboards or drill small holes to ventilate wall cavities, then track readings until the framing returns to a normal dry level.
- Structural drying after the firefighting water
- Electronics sent to a specialist vendor
Standing in front of a burned house right now?
Call the free line and a dispatcher will walk you through the next hour and start finding an independent crew near you.
Call +1-833-336-1630What you can expect from a Unify Fire Solutions referral
Nobody can promise the cost of a fire job or the length of a rebuild. These are the things we can say plainly.
Written estimates up front
The independent contractor provides a written, line-item estimate before work starts, and you should always ask for one. Most crews in Connecticut, CT write estimates in the same software insurance adjusters use, which makes comparing the two much easier.
Fast dispatch, any hour
The phone is answered 24/7 and dispatch starts the moment you call. Arrival time depends on which crews are free and how far away they are, and it is often the same day.
Independent crews working statewide
Our network covers metro areas, suburbs and small towns throughout Connecticut, CT. The crew you get is local to your area and knows how the nearby building department and utilities operate.
Licensed, insured independent pros
Every referral goes to a licensed and insured independent contractor. Even so, check the license and request a certificate of insurance before you sign, and ask if the crew works to IICRC S700 guidance.
A second option if you need one
If the first contractor turns out not to be the right fit, call us again and we'll connect you with someone else. It might be scheduling, a second estimate your adjuster asked for, or just a bad fit in personality. Any of those is a fine reason.
Getting two estimates is common on larger fire jobs, and many adjusters welcome it. Just make sure both contractors are pricing the same scope, item for item, so you are comparing like with like.
A step-by-step guide after a fire
No two fires are alike, yet the sequence of decisions is remarkably similar anywhere in Connecticut, CT. Work through this list while a crew is on the way.
- 1
Safety first, then the call
Stay out until the fire department tells you it's safe to return. Then call +1-833-336-1630. A dispatcher will ask about the scene, the water, and any open roof or windows, and will start looking for a crew right away.
- 2
Arrival and site security
The independent contractor walks the property with you, photographs everything, and boards or tarps any openings. Where water is pooled, extraction frequently begins on the very first visit.
- 3
Written scope and estimate
You get a written, line-item estimate that separates emergency mitigation from repairs. It goes to your adjuster, and only emergency stabilization should proceed before you sign.
- 4
Cleaning, drying and deodorizing
Crews remove charred materials, dry the structure, clean soot from every affected surface, and treat odor. Daily moisture logs and photos give the adjuster a clear record of progress.
- 5
Repairs and final walkthrough
Permitted repairs follow, from framing and electrical to drywall, paint and flooring. Before paying the final bill, walk through with the contractor and write down anything still unfinished.
In the first hour, before a crew gets there: get everyone out and accounted for, including pets. Do not re-enter until the fire department releases the scene, and never switch breakers on or off yourself after a fire. Write down the incident number the firefighters give you; your insurer will ask for it. If it's safe from outside, shoot wide photos and video of every side of the building.
Fire department release and red-tagged properties
The fire department controls the property until it formally releases the scene. When investigators are still determining the cause, you could be kept out for several hours or, now and then, a few days.
After release, a local building official may post a placard on the door. A green tag generally means the building can be occupied, a yellow tag means limited entry, and a red tag means nobody goes in until the structure is evaluated. The placard system differs from one jurisdiction to the next in Connecticut, CT, so read the notice and call the number on it.
A red tag doesn't stop mitigation from the outside. Contractors can still board up, tarp the roof and fence the site, and many will coordinate with a structural engineer to get the tag lifted.
Power, gas and water shutoffs
During the fire, crews often pull the electric meter and shut the gas. After a fire shutoff, the utility typically won't turn service back on until an inspection, and in some cases a licensed electrician or plumber has to sign off first.
For that reason, restoration crews usually arrive with generators to power the scrubbers and dehumidifiers. Contact your power, gas and water companies directly, report the fire, and ask what they require before restoring service.
If water service is still live and a line ruptured in the heat, close the main shutoff. You'll usually find it near the meter or where the supply enters the building.
How crews coordinate with adjusters
Call your insurance company the same day and get a claim number. Nearly every policy expects you to prevent additional damage, and that is the purpose of emergency mitigation. You do not need to wait for the adjuster before boarding, tarping and drying, but keep every receipt.
Contractors throughout Connecticut, CT normally bill in two parts: a mitigation invoice for board-up, water removal, drying and cleanup, and a restoration invoice for the rebuild. Adjusters handle the two differently, so separating them keeps the claim moving. Ask for dated photos, daily moisture logs, and a contents inventory, and request copies of everything sent to the insurer.
When the home can't be lived in, many policies cover additional living expenses, also called loss of use, for things like a hotel and meals. Limits vary from policy to policy, so ask your agent what applies and keep all receipts.
Permits and local building departments
Cleaning and mitigation usually don't need a permit. Structural repair, electrical rewiring, new framing, roof replacement and HVAC replacement almost always do. Permits in Connecticut, CT are issued by local city or county building departments, so the forms, fees and inspection schedules vary from one place to the next.
A local contractor who knows the nearby office will usually pull the permit under their own license. Make sure the permit is posted on site and that inspections are signed off before walls are closed up. Your insurer may ask for the final inspection record before releasing the last payment.
Opening the walls of an older home can bring up new issues. If the building is old enough to contain asbestos in drywall texture, flooring or duct wrap, or lead in the paint, testing may be required before demolition. Repairs may also have to meet the current code rather than the code the house was built under, which some policies cover as ordinance or law coverage, so ask your agent.
Landlord and tenant responsibilities
With a rental property, the structure and the renter's belongings typically fall under different policies. The landlord's policy generally covers the structure and the owner's fixtures, while a renter's policy covers the tenant's furniture, clothing and relocation costs.
Landlords should contact tenants in writing about access, timelines and whether the unit is habitable. Renters should take their own photos before pack-out and request a copy of the contents list. Rules for both sides come from Connecticut, CT law and the lease, so review the lease and contact a local housing office or attorney with questions.
The landlord or the tenant can call us. We usually suggest the property owner authorize the structural work and the tenant handle their own contents claim, with the same crew doing both if everyone agrees.
Getting a small business back open
A shuttered business loses money every day, which makes fast mitigation even more important. Ask your commercial carrier about business interruption coverage and track lost income starting on day one.
Food service, salons, clinics and grocers usually need a health or fire inspection before they can reopen. Have the contractor write a phased schedule that shows what has to be done ahead of each inspection.
Before the computers are moved, make sure your sales system, payroll and customer records are backed up. If you lease the space, notify the landlord right away, since the lease normally says who pays for which repairs.
Why the first 24 to 72 hours matter: soot keeps etching surfaces, wet materials start to grow mold, and odor soaks deeper into porous materials every day it sits. Starting mitigation quickly is usually the single biggest factor in how much of your home can be cleaned rather than replaced.
What callers across Connecticut, CT told us afterward
Shared with permission, with last names shortened.
The dryer vent caught at about eleven at night. By the time the fire department cleared us, I couldn't think straight. The dispatcher asked a few plain questions and reminded me to grab the incident number before the engine pulled away. The contractor was there the next morning, boarded the laundry room, and had extraction going before my adjuster even called back.
I own two rental duplexes and one tenant had a kitchen fire. The best part was that the contractor split the mitigation bill from the rebuild estimate. The adjuster signed off on the first invoice in a week, and the neighboring tenant stayed put because the crew sealed off the shared wall and attic.
We rented our place and the fire started in the unit below us. I didn't know my renter's policy would pay for a hotel until the dispatcher suggested I ask my agent. The crew packed out our clothes and the kids' things and gave me a typed inventory, which made the claim a lot easier.
A grease fire shut down my restaurant on a Friday. The contractor set up plastic walls so we could get the dining room cleaned and inspected while they kept working on the kitchen. They gave me a written list of what had to be done before the health inspection, and we passed the first time.
The first company I was sent couldn't start for almost a week. I called the line again, explained the delay, and the dispatcher put me in touch with another crew that started the next day. No argument, no hassle. That is all I wanted.
Fire damage questions from Connecticut, CT callers
How fast can a Fire Damage Cleanup technician arrive in Connecticut, CT?
Dispatch starts the moment you call, and the phone is answered 24/7. Arrival depends on which independent crews are free and how far they have to drive to reach your property. In most of Connecticut, CT it is often the same day, and the dispatcher will tell you what to expect before you hang up.
Do you provide upfront pricing?
We don't set prices, since Unify Fire Solutions is a referral line and not the contractor. The independent contractor provides a written, line-item estimate before work starts, and you should ask for one before signing anything. Emergency board-up or water extraction may begin right away to prevent more damage, but ask the crew to explain those charges in writing too.
What emergency services are available?
The crews we refer usually cover board-up, tarping, extraction of firefighting water, drying, soot removal, air scrubbing and deodorization. A lot of them also handle contents pack-out and storage, duct cleaning, and the rebuild after mitigation. Tell the dispatcher what you're seeing and we'll match you with a crew that does that work.
Do contractors in CT work directly with my insurance company?
Most independent contractors in CT are used to working alongside insurance adjusters. They document the damage with photos, moisture readings and a line-item estimate, and they can send that file to your adjuster with your permission. Keep in mind the policy is between you and your insurer, so you make the final decisions and should keep copies of everything.
Do I need a permit for fire damage repairs in Connecticut, CT?
Cleanup and drying generally don't need one, while structural, electrical, roof and HVAC work nearly always does. Permits in Connecticut, CT are issued by your local city or county building department, and requirements vary by location. A local contractor will usually pull the permit and schedule inspections for you.
Can I stay in my house after a fire?
It depends on the fire department's release, any building placard, and whether utilities can be safely turned back on. Even after a minor fire, soot and odor can make the home unhealthy to sleep in, particularly for children, older adults and people with asthma. Ask your insurer whether your policy includes additional living expenses for temporary housing.
Should I call my insurance company or a contractor first?
Call both on the same day, in whatever order works. Nearly every policy expects you to stop additional damage, so boarding and water removal shouldn't wait on the adjuster. Get a claim number, keep every receipt, and let the contractor know your claim number so their paperwork matches.
What should I throw away after a fire?
Discard any food, medication or cosmetics exposed to heat, smoke or hose water. Photograph and list everything else before discarding it, and let the crew help sort what can be saved. Clothing, dishware and solid furniture that look ruined can often be cleaned.
Is it safe to clean up soot myself?
Scrubbing soot with a damp cloth tends to grind it into paint and fabric, and the residue can carry acids and fine particles that are bad to inhale. If you must go in for essentials, wear gloves and an N95 mask, and keep fans and the HVAC off. Leave the cleaning to the crew, who will test the residue and choose the right chemistry.
Does Unify Fire Solutions serve every part of Connecticut, CT?
The network covers metro areas, suburbs and rural towns across Connecticut, CT. In remote areas the nearest crew may be farther away, so the dispatcher will be upfront about expected timing. Call +1-833-336-1630 with the property address and we'll let you know who can reach it.
Fire Damage Cleanup coverage throughout Connecticut, CT
A single number connects you with independent crews anywhere in Connecticut, CT, from crowded metro blocks to farmhouses on long rural roads.
Around the larger metros, several contractors are often within reach, which lets the dispatcher match on a specialty like commercial kitchens or condo towers. Suburban crews see plenty of attached garage fires, dryer vent fires and kitchen fires in single-family houses. In rural Connecticut, CT the closest crew may drive farther and usually brings generators and trailers, since utilities can take longer to come back.
- Single-family homes
- Condos and townhouses
- Apartment buildings
- Rental duplexes
- Mobile and manufactured homes
- Restaurants
- Retail stores
- Offices
- Warehouses
- Churches and schools
- Detached garages
- Barns and outbuildings
Common causes we hear about include kitchen fires, dryer vents, space heaters, electrical faults, candles, lightning strikes, grills, garage fires, furnace puff-backs and fire spreading from a neighbor's property. Whatever the cause, the first call is the same.
If you are out of state when it happens, say at a rental property or a parent's home, you can still call. The dispatcher can coordinate with a neighbor, a tenant or a property manager on site, and the contractor can send photos and the written estimate to you by email before anything beyond emergency stabilization begins.
